SEWING MACHINE | FAULTS, CAUSES AND REMEDIES

SEWING MACHINE FAULTS, CAUSES AND REMEDIES

	FAULTS	CAUSES	REMEDIES
1.	Upper thread breaking	Machine not properly threaded, needle bent or blunt	Thread machine properly check the machine needle and change it if bent or blunt.
2.	Lower thread breaking	i)Tension too tight ii) Improper threading of button case of shuttle.	Check / regulate the tension, thread the bobbin case properly.
3.	Breaking needle	Using the needle on heavy	Use appropriate / correct size of needle, check bent / blunt needle.
4.	Skipping Stitches	Needle too small for the thread, needle not accurately set into the needle jar, needle bent or blunt.	Use accurate or correct size of needle, set the needle properly unto the needle bar.
5.	Noisy Treadle	If the treadle is noisy, the crew on which it is piloted is loose.	Tighten the crew
6.	Machine work heavily	The machine belt maybe too tight, the machine is gummed and needs general cleaning the belt may also be too loose and slip on the balance wheel causing the operator to treadle more than necessary,	Loosen machine belt give the machine a thorough cleaning; check to see if the belt needs tightening.

What is fullness?

Fullness in clothing construction means the provision of extra allowance in the garment. This fullness can be created on controlled using darts, tucks, gutter and pleats.

TYPES OF FULLINESS

Darts

They are tapered folds of fabric and they are stitches on the wrong side of a good.

USES

They control fullness.
They turn fabric into shapes to fit to human figure.
They help to give a good fitting and shape to the finished garment.

Tucks

They are special stitched folds made in garments. The fold is formed on the right side of the garment.

USES OF TUCKS

To provide extra width
To decorate a garment s a style feature.
They can be used to hide a join in the fabric.

Gathers: They are small, soft folds made is garment they are commonly used in children’s clothes, making light weight skirts.
Pleats: is a fold of material designed to give extra width in garments. Pleats are used mainly on tailored skirts, dress skirts and shirts giving fullness in wear.

OPENINGS

Openings are features in garments. They help us to put on and take off our clothes. There are different kinds of openings. They can also be used to decorate the garment.

TYPES OF OPENINGS

Continuous wrap opening: This is a short opening; it can be fastened with hook and eye, buttons and button holes and press studs.
Faced slit opening: It can be used for front or back neck openings, wrist cuff openings on long sleeves sit into a band.

FASTENINGS

Fastenings are devices on things attached to the openings.

TYPES

Zips
Press studs
Hooks and eye / bars
Buttons and loops
Buttons and button hole
Eyelets and cards.