NATURAL AND SYNTHETIC POLYMERS

NATURAL AND SYNTHETIC POLYMERS

Polymerisation (addition and condensation) plastics.    Thermosplastic and thermosetting polymers, resins.     Polymer is the final product, macromolecule of high molecular mars.  It consists of a repeating units and its general molecular formula may be represented as [repeating units]_n where n is a very large whole number.

N.B:-    All polymers are macromolecules, but not all macromolecule but it is not polymeric.

 

NATURAL POLYMERS

These are organic compounds which can be found in living thing e.g. carbohydrates like starch and cellulose and all proteins fats and oils are not large enough to be grouped as giant molecule or polymer.

 

SYNTHETIC POLYMERS

These are called plastics e.g. nylon polythene etc.

 

EVALUATION

1. State a difference between natural polymers and synthetic polymer with example each.
2. What is another name for synthetic polymer?

 

POLYMERIZATION

This is the process whereby two or more monomers link/join together to form a compound of

high molecular mass.

 

TYPES OF POLYMERIZATION

1. Addition polymerization:- these occur when two or more of the same monomers join together    to form the polymer without elimination of any small molecules.

 

CHARACTERISTICS OF MONOMER

–           It must be simple.

–           Unsaturated

–           There should be double bonds between the carbon atom.

e.g.n[CH₂CH₂ ]              ……..CH₂CH₂[CH₂CH₂]_nCH₂CH₂……

 

2. CONDENSATION POLYMERIZATION:- This is process whereby two or more smaller

molecule (monomers) join together to form a giant molecule (polymer) with elimination of     trace/small molecule such as waters ammonia, hydrogen chloride.

 

TYPES OF CONDENSATION POLYMERIZATION

1. COPOLYMER :- This is formed from two condensing monomers of different types.
2. HOMOPOLYMER :- It is formed from monomers of the same type.

 

CONDITIONS NECESSARY FOR POLYMERIZATION

–           High temperature

–           High pressure

–           Presence of catalyst (initiator) e.g. oxygen, hydrogen peroxide.

 

EVALUATION

1. State two conditions necessary for polymerization of ethane to from polythene.
2. Mention one difference between additional polymerization and condensation polymensation.

 

PLASTICS

Plastics are synthetic which can be heated or pressured to form any shape.

 

THERMOPLASTIC

Thermoplastics are type of synthetic materials which can be heated and remoulded to any shape e.g. nylon, polythene, polypropene, Perspex etc.

 

THERMOSETS

Thermosets, on the other hands cannot be softened or melted by heat and remoulded once they are formed e.g. uera-methanal, bakelite.

 

   Thermoplastics and thermosets

Thermoplastics	Thermosets
Polythene	Bakelite
Polypropene	Urea-methanal
Polystyrene
Nylon
Terylene
Perspex

 

RESINS

This is obtained from the rubber tree.  The fluid obtained from the tree can be heated and changed to elastic solid known as rubber.  The rubber consists of 2-methyl but-1, 3- diene monomers known as isoprene.

CH₃

nCH₂ =      C         CH    =    CH₂

2 – methylbuta -1, 3-diene.

VULCANIZATION

This is the process of heating natural rubber with sulphur to give rubber a greater tensile, strength, durability and elasticity over a wide range of temperature.

 

SYNTHETIC RUBBER

Examples of synthetic rubbers are poly 2-chlorobuta -1,3diene, styrenebutadiene rubber (SBR), poly bute -1, 3- diene and poly 2-methyl propene.

 

EVALUATION

1. What is resin?
2. State two (2) differences between thermoplastic and thermoset.

 

WEEKEND ASSIGNMENT

1. The following are examples of small molecules based during polymerization process.
2. acid                    B.  HCl          C.H₂O                    D.  NH₃
3. Polymerisation of ethane produces ……………
4. Perspex            B.  isoprene                  C.  polythene          D.  ammonia
5. Bakelite is a good example of …………..
6. natural rubber     B.  thermoset     C.  thermoplastic   D.  additional polymerization
7. Starch and cellulose are good examples of …………
8. polythene            B.  natural polymer       C.         synthetic polymer    D.  food
9. Joining together of smaller molecules to form a giant molecule is called ………..

process.       A.  hydrogenation   B.  saponification   C.  esterification  D.  polymerization

 

THEORY

1            (a)      What are the conditions necessary for polymerization.

(b)      List two types of polymerization.

2            (a)      Write an equation for the preparation of polythene from ethane.

(b)      What are the monomer present in the following:

–           polythene

–           polyvinyl/chloride

–           polytetrafluoro ethane

–           polypropene

 

See also

Fats and Oils As Higher Esters

ALKANOIC ACIDS

ALKANOLS

AROMATIC HYDROCARBONS

ALKYNES